Ошибка 0x80080008 Windows 10 как исправить?

Как исправить код ошибки 0x80070422 брандмауэра Windows 7, 8 или 10 при обновлении операционной системы?

Ошибка 0x80080008 Windows 10 как исправить?

Во время использования компьютера под управлением системы Windows 7, 8 или 10 можно встретить ошибку: «Брандмауэру Windows не удалось изменить некоторые параметры. Код ошибки 0x80070422».

Сразу понятно, с чем связана проблема и на что обращать внимание в первую очередь, а именно на брандмауэр.

В данной статье вы найдете подробную инструкцию, которая подойдет для любой операционной системы семейства Виндовс.

Что это за ошибка и почему она возникает?

В любой ОС есть встроенный защитный экран, позволяющий контролировать программное обеспечение, выходящее в сеть, а также сетевые подключения. Другими словами, брандмауэр фильтрует трафик между компьютером и сетью.

Есть много программ, для работы которых необходим включенный фаервол, если их запустить без него, вы увидите ошибку 0x80070422. Это указывает на то, что средство защиты выключено пользователем. Аналогичное сообщение Вы увидите, если при выключенном брандмауэре попробуете купить некоторые игры и программы в магазине Windows Store на Windows 10.

Также ошибка появляется при попытке обновления Windows. В данном случае сообщение от Автономного установщика обновлений выглядит так: «Установщик обнаружил ошибку: 0x80070422».

Способ №1 – включаем брандмауэр

Чтобы избавиться от кода ошибки и полностью устранить проблему, нужно включить брандмауэр. Используя ОС Виндовс 7, провести процедуру можно следующим образом:

  1. Откройте Меню Пуск и нажмите по разделу, называемому «Панель управления».
  2. Измените тип просмотра ярлыков на «Мелкие значки».
  3. Из списка выбираете пункт «Брандмауэр Windows».
  4. Слева отыщите пункт «Включение и отключение брандмауэра Windows».
  5. Переведите флажки в положение «Включить брандмауэр Windows».

Способ №2 – службы

Брандмауэр включается не только описанным выше способом. Тем более, если он не сработал, используем следующий способ:

  1. Нажмите по каталогу «Мой компьютер» в Windows 7 или «Этот компьютер» в Windows 10 и перейдите в раздел «Управление».
  2. Слева находим подраздел «Службы».
  3. В правой части окошка находим строчку «Брандмауэр Windows» и дважды жмём по ней мышкой.
  4. В открывшемся окошке в выпадающем меню «Тип запуска» выбираем вариант «Автоматически». А если состояние выключено, нажмите «Запустить».
  5. Нажмите в окошке кнопку «Применить» и перезагрузите компьютер.

Способ №3 – загрузка утилиты по устранению неполадок

На официальном портале Майкрософт есть множество утилит, способных исправить многие проблемы в Windows. Для загрузки данного инструмента сначала переходим по ссылке: https://support.microsoft.

com/ru-ru/help/2970908/how-to-use-microsoft-easy-fix-solutions и ищем там другую ссылку на скачивание утилиты — «Поиск и устранение проблем со входящими подключениями компьютеров и брандмауэром Windows».
Запустив инструмент, нажимаете кнопку «Далее».

Тут же начинается поиск неисправностей. Если проблема с брандмауэром есть, утилита скажет об этом и исправит.

Способ №4 – использование антивирусных инструментов

Для устранение программных ошибок компания Microsoft рекомендует сканировать компьютер на наличие вирусов. Чтобы ошибка 0x80070422 нас больше не тревожила, можно использовать программу AntiMalware Bytes. Установив её, просканируйте систему, а если угрозы будут найдены – устраните.

Для более глубокого сканирования можно воспользоваться такими средствами:

  • Kaspersky Virus Removal Tool;
  • Dr Web Cureit;
  • AVZ.

Также Майкрософт предлагает скачать свою собственную утилиту для сканирования — Microsoft Safety Scanner. Скачать её можно отсюда: https://www.microsoft.com/ru-ru/wdsi/products/scanner.
После запуска принимаем условия лицензионного соглашения, нажимаем «Далее» и выбираем один из указанных методов сканирования — «Быстрая проверка» или «Полная проверка».

Способ №5 – включение Центра обновлений

Последний вариант, который можно осуществить для устранения проблемы – включить или перезапустить Центр обновлений Windows. Но, если только вы пытаетесь загрузить обновления для системы.

  1. Заходим в раздел «Служб». Достаточно использовать сочетание клавиш Win+R на клавиатуре и ввода команды — services.msc.
  2. В окошке находим строчку «Центр обновления Windows» и дважды жмём по ней мышкой.
  3. Если служба работает, попробуйте её сначала остановить, а потом заново запустить. В меню «Тип запуска» выберите опцию «Автоматически».
  4. Перезапустите компьютер.

Используя все пять рассмотренных методов решения проблемы с брандмауэром, можно добиться успеха.

Наглядное решение проблемы с брандмауэром в Виндовс 7 вы можете посмотреть тут:
Порядок действий в случае возникновения ошибки при обновлении системы смотрите на следующем видео:

Источник: https://yakadr.ru/windows/oshibki/0x80070422.html

How to fix update error 0x80080008 on Windows 10, 8, 8.1 and 7?

Ошибка 0x80080008 Windows 10 как исправить?

By Eunice Samson | July 4, 2018 |

At this point, update errors are a common sight for Windows users. In older versions of the system, people can use different tricks to disable the updates. However, with Windows 10, there is only little you can do to stop the process. The best option you have is to postpone the installation.

Читайте также  Itunes ошибка 3194 как исправить?

One of the recurring update errors is the one with the code 0x80080008. When you see this error code, you will notice that the update process gets stuck or some of the files are not successfully downloaded and installed.

If you want to know how to fix Windows 10 update error 80080008, you’re in luck. In this article, we will discuss some of the best workarounds for this issue.

While our solutions work best for Windows 10, they are also applicable for older systems Windows 8, Windows 8.1, and Windows 7.

Common Scenarios Related to the Error 0x80080008

Before we learn how to fix Windows 10 update error 0x80080008, it would be best if we discuss some of the common issues related to it. In this way, you will gain a better idea of how to prevent the error from appearing again.

  • Windows update failed – The error 0x80080008 can cause the updates to stop working. You should be able to resolve this issue by disabling your third-party anti-virus. A good workaround would be to manually download the updates. We will discuss these solutions below.
  • 0x80080008 Server 2016 – A lot of users also reported problems with Windows Server 2016. Our methods are designed to resolve the error 0x80080008 on Windows 10, but some of them should apply to Windows 2016.

Method 1: Disabling your Anti-Virus

Some users reported that the update error 0x80080008 can appear due to problems with third-party anti-virus programs. If you have one, try disabling it and check if the update will push through. However, if that doesn’t work, we recommend removing your anti-virus entirely. If this solution gets rid of the error, then it is high time you switched to a different security tool.

There are several anti-virus programs on the market, but the one that will give you optimum protection without interfering with your system is Auslogics Anti-Malware. What’s more, this reliable tool can detect attacks and threats that Windows Defender might miss.

Method 2: Performing SFC and DISM Scans

If the error 0x80080008 keeps on coming back, there must be something wrong with your installation. It is possible that there are damaged or corrupted system files in your computer. Thankfully, this can be easily fixed by performing an SFC scan. You can do that by following these steps:

  1. On your keyboard, press Windows Key+S.
  2. Type “command prompt” (no quotes).
  3. Right-click Command Prompt from the results, then select Run as Administrator.
  4. Once Command Prompt is up, type “sfc/scannow” (no quotes), then press Enter.

The tool will locate and repair corrupted files. The process may take a couple of minutes. So, it is important that you avoid interfering with it. However, if the SFC scan does not get rid of the issue, you can try running a DISM scan. You can do that by following these steps:

  1. Launch Command Prompt as an administrator.
  2. Run the following command:

DISM.exe /Online /Cleanup-image /Restorehealth

  1. If the DISM scan can’t get the files online, you can use your installation media. Insert your USB flash drive or DVD, then run the following command:

DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSourceWindows /LimitAccess

  1. Remember to replace ‘C:\RepairSourceWindows’ with your USB flash drive’s or DVD’s path.
  2. Once the scan is complete, check if the error persists.

If you’re going to use your installation flash drive or DVD in running the DISM scan, we recommend updating your drivers first. In this way, you will be able to resolve the issue and install the Windows updates without any problem. You can conveniently do this by using a reliable tool  Auslogics Driver Updater.

Method 3: Restarting the components of your Windows update

It is also possible that certain components of Windows update are causing the error 0x80080008 to appear. Simply restart them by following the instructions below:

  1. Right-click the Windows logo on your taskbar.
  2. Select Command Prompt (Admin), then run the following commands:

net stop wuauserv

net stop cryptSvc

net stop bits

net stop msiserver

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

ren C:\Windows\System32\catroot2 Catroot2.old

net start wuauserv

net start cryptSvc

net start bits

net start msiserver

Method 4: Manually downloading the update

If the error 0x80080008 is blocking the update process, one of the ideal workarounds is to manually download and install the components. You can do that by following these steps:

  1. The first thing you have to do is acquire the KB number of the update you need to download. You can go to the Windows Update section in your system or visit the Windows Update History website.
  2. Once you’ve taken note of the KB number of the update, visit the Microsoft Update Catalog website. Type the KB number of the update in the search field.
  3. You will see a list of downloadable updates. Look for the one that matches your system architecture.
  4. Click the Download button.

After following these steps, your system will be updated and your problem will be resolved. It is worth noting that this is just a workaround and it does not fix the core issue. So, if a new update is rolled out, the error 0x80080008 might come back.

Method 5: Restarting BITS services

Windows updates are successfully installed with the aid of various services, including the Background Intelligent Transfer Service (BITS). In some cases, this service can crash and prevent you from completing the update process. What you’d have to do is restart the service. Just follow the steps below:

  1. On your keyboard, press Windows Key+R. This should launch the Run dialog box.
  2. Type “services.msc” (no quotes), then hit Enter.
  3. Scroll down until you find Background Intelligent Transfer Service (BITS). Double-click it.
  4. If you notice that the service is set to ‘Stopped’, click the Start button.
  5. Go to the Recovery tab and ensure that First Failure and Second Failure are set to Restart the Service.
  6. Click Apply and OK.
Читайте также  Ошибка 0х0000001е Windows 7 как исправить?

Method 6: Using Safe Boot mode

It is possible for certain background processes to slow down or even interfere with an update. You can try to tweak your services to ensure that nothing will conflict with the update. To do that, follow these instructions:

  1. Press Windows Key+R on your keyboard.
  2. Type “msconfig” (no quotes), then hit Enter.
  3. Click the Services tab, then select the Hide all Microsoft Services option.
  4. Click Disable All, then click Apply.
  5. Click the Startup tab, then select Open Task Manager.
  6. Disable the Startup programs one by one.
  7. Restart your Computer and try installing the updates again.

Method 7: Performing an in-place upgrade

Some users reported that they had been able to get rid of the error 0x80080008 by performing an in-place upgrade. This method allows you to install the latest version of your operating system without touching your files and applications. Here’s how you do it:

  1. Go to Microsoft’s website and download the Media Creation Tool.
  2. Choose Upgrade this PC Now, then click Next. The setup will now prepare the necessary files.
  3. Select ‘Download and install updates (recommended)’, then click Next.
  4. Follow the on-screen instructions until you reach the screen which says, ‘Ready to install.’ Click ‘Change what to keep’.
  5. Don’t forget to choose ‘Keep personal files and apps’, then click Next.

Doing these steps should update your Windows system to the latest version. What’s more, the process will permanently get rid of the error 0x80080008.

What Windows issue would you us to solve next?

Let us know in the comments below!

Источник: https://www.auslogics.com/en/articles/fix-update-error-0x80080008-on-windows/

Fix update error 0x80080008 on Windows 10, 8.1, 7 PCs

Ошибка 0x80080008 Windows 10 как исправить?

We’re all familiar with Windows 10 update issues. This kind of problems is probably the most common flaw that Windows 10 users encounter from time to time.

All of those pesky issues are followed by an identification code in order for them to get sorted out easier. One of those errors that are common and repetitive is the one with the code 0x80080008.

Namely, you’ll get prompted with this error code when your update is either stuck or some of the update files are not successfully downloaded and installed.

But, don’t worry, we have a few workarounds that should resolve your issue, in case it bothers you.

Windows update error 0x80080008 variations

Update error 0x80080008 will prevent you from downloading the latest updates. Speaking of which, here are some similar issues that users reported:

  • 0x80080008 Server 2016 – Many users reported this issue with Windows Server 2016. Although our solutions are mostly for Windows 10, you should be able to apply some of them to the Windows Server as well.
  • Windows update failed – This is a Windows Update error, and it will cause updates to stop working. However, you should be able to fix the problem by disabling your antivirus or by downloading the update manually.

Solution 1 – Check your antivirus

According to users, sometimes Update error 0x80080008 can appear due to problems with your antivirus. To fix this issue, it’s recommended that you disable certain antivirus features and check if that helps.

If that doesn’t work, you might have to disable your antivirus completely and then try to perform the update. However, if the issue is still there, your next step would be to completely remove your antivirus.

Even if you decide to remove your antivirus, your PC should still be protected by Windows Defender, so you won’t have to worry about your safety.

If removing the antivirus solves your problem, this might be a good time for you to consider switching to a different antivirus solution. There are many great antivirus applications on the market, but if you want a maximum protection that won’t interfere with your system in any way, we suggest you consider BullGuard (free download).

Solution 2 – Perform SFC and DISM scans

If you keep getting update error 0x80080008 on your PC, the issue might be your installation. Your Windows installation might be damaged or corrupted, and that can lead to this error.

However, you can fix the problem simply by performing an SFC scan. To do that, just follow these steps:

This tool proved valuable in many situations. Nonetheless, if the corrupted files are not the core of the problem, you may want to try other workarounds.

If SFC scan can’t fix the problem, or if you can’t run SFC scan at all, your next step would be to run DISM scan. To do that, just follow these steps:

  1. Start Command Prompt as administrator.
  2. Type following command on the command line:
    • DISM.exe /Online /Cleanup-image /Restorehealth

  3. In case the DISM can’t obtain files online, try using your installation USB or DVD. Insert media and type following command:
    • DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess
  4. Be sure to replace ”C:RepairSourceWindows” path of your DVD or USB.

Once the scan is finished, check if the problem is still there. If you weren’t able to run SFC scan before, try running it again after DISM scan and check if that solves the problem.

Solution 3 – Restart Windows Update components

According to users, sometimes you might encounter Update error 0x80080008 due to Windows Update components. To fix the problem, it’s required that you restart Windows Update components.

You can do this manually, but that can be a tedious process, so usually it’s better to use Command Prompt.

To reset Windows Update components using Command Prompt, you just need to do the following:

  1. Start Command Prompt as an administrator.
  2. Now run the following commands:
  • net stop wuauserv
  • net stop cryptSvc
  • net stop bits
  • net stop msiserver
  • ren C:WindowsSoftwareDistribution SoftwareDistribution.old
  • ren C:WindowsSystem32catroot2 Catroot2.old
  • net start wuauserv
  • net start cryptSvc
  • net start bits
  • net start msiserver

After running these commands the issue should be resolved and you’ll be able to download the updates again. Running these command manually can be tedious.

If you want to automatically reset Windows Update components, you can create a Windows Updates reset script and run it to automatically reset the required services.

Solution 4 – Manually download the update

If you keep getting update error 0x80080008, you might be able to circumvent it simply by downloading and installing the update manually. This is relatively simple, and you can do it by following these steps:

  1. First you need to find the KB number of the update you’re trying to download. You can do that from Windows Update section on Windows or by visiting Windows Update History website.
  2. Once you find the KB number of the update you’re trying to download, you need to visit Microsoft Update Catalog website. Now you just need to enter the number of the update in the search field.
  3. List of results will appear. Find the update that matches your system architecture and click the Download button to download it.
  4. After you download the update, run the setup file in order to install it.

Once the update is installed, your system will be updated to the latest version and the issue will be resolved. Keep in mind that this solution won’t fix the core problem, instead it will just allow you to download and install the update manually and circumvent the issue.

Solution 5 – Restart BITS services

Background Intelligent Transfer Service (BITS) is an essential service for Updates. On some occasions, due to various reasons it can crash and stop working. What you need to do is restart the service and see if there is an improvement in the Update protocol.

  1. Press Windows key + R. In search line type services.msc and press Enter.
  2. Look for Background Intelligent Transfer Service (BITS) and double-click it to open its properties.
  3. If the service isn’t running, click the Start button.
  4. Choose Recovery tab and make sure that First failure and Second failure are set to Restart service.
  5. Confirm selection and check for updates.

That gets the job done for some users. However, if you are still prompted with the error, move on to the next solution.

Solution 6 – Boot in a Safe Boot mode

On some occasions, the background programs and their respective processes can slow down or even prevent an update. So, try tweaking out your services and startup to prevent the possible conflict.

  1. Press Windows Key + R and enter msconfig. Now click OK or press Enter.
  2. Go to Services tab and check Hide all Microsoft services box. Then click Disable All and click Apply.
  3. Go to Startup tab and choose Open Task Manager.
  4. Disable all Startup programs individually.
  5. Restart your PC and try updating.

You should be able to find and download available updates after this workaround.

Solution 7 – Perform an in-place upgrade

According to users, sometimes your only way to fix this problem is to perform an in-place upgrade. In case you’re not familiar, an in-place upgrade will force Windows 10 to install the latest version while keeping all your files and applications untouched.

To perform an in-place upgrade, you need to do the following:

  1. Download Media Creation Tool and run it.
  2. Select Upgrade this PC now and click Next.
  3. Wait while the setup prepares the necessary files.
  4. Now select Download and install updates (recommended) and click Next.
  5. Wait for the updates to download.
  6. Follow the instructions on the screen until you reach Ready to install screen. Click on Change what to keep.
  7. Select Keep personal files and apps and click Next.
  8. Follow the instructions on the screen to complete the installation.

Once the process is finished, your Windows will be updated to the latest version and the problem should be permanently resolved.

Done. Have in mind that you can use workarounds presented in this article for multiple errors, not just the one we addressed today. In case you have any questions or suggestions, the comments section is bellow.

For more Windows Update workarounds, and additional info, make sure to check our Windows Update hub.

Editor’s Note: This post was originally published in March 2017 and has been since completely revamped and updated for freshness, accuracy, and comprehensiveness.

RELATED STORIES YOU NEED TO CHECK OUT:

Источник: https://windowsreport.com/windows-10-update-error-0x80080008/

Понравилась статья? Поделиться с друзьями:
О компьютерах просто